Exam
Sections and Sub-task Objectives
|
1.00 |
Implement Layer 2
Technologies |
|
1.10 |
Implement Spanning Tree Protocol
(STP) |
|
|
(a) 802.1d |
|
|
(b) 802.1w |
|
|
(c) 801.1s |
|
|
(d) Loop guard |
|
|
(e) Root guard |
|
|
(f) Bridge protocol data unit
(BPDU) guard |
|
|
(g) Storm control |
|
|
(h) Unicast
flooding |
|
|
(i) Port
roles, failure propagation, and loop guard operation |
|
1.20 |
Implement VLAN and VLAN Trunking Protocol (VTP) |
|
1.30 |
Implement trunk and trunk
protocols, EtherChannel, and load-balance |
|
1.40 |
Implement Ethernet technologies |
|
|
(a) Speed and duplex |
|
|
(b) Ethernet, Fast Ethernet, and
Gigabit Ethernet |
|
|
(c) PPP over Ethernet
(PPPoE) |
|
1.50 |
Implement Switched Port Analyzer
(SPAN), Remote Switched Port Analyzer (RSPAN), and flow control |
|
1.60 |
Implement Frame Relay |
|
|
(a) Local Management
Interface (LMI) |
|
|
(b) Traffic shaping |
|
|
(c) Full mesh |
|
|
(d) Hub and spoke |
|
|
(e) Discard eligible
(DE) |
|
1.70 |
Implement High-Level
Data Link Control (HDLC) and PPP |
|
2.00 |
Implement IPv4 |
|
2.10 |
Implement IP version 4
(IPv4) addressing, subnetting, and variable-length
subnet masking (VLSM) |
|
2.20 |
Implement IPv4 tunneling
and Generic Routing Encapsulation (GRE) |
|
2.30 |
Implement IPv4 RIP version 2
(RIPv2) |
|
2.40 |
Implement IPv4 Open Shortest Path
First (OSPF) |
|
|
(a) Standard OSPF areas |
|
|
(b) Stub area |
|
|
(c) Totally stubby area |
|
|
(d) Not-so-stubby-area
(NSSA) |
|
|
(e) Totally NSSA |
|
|
(f) Link-state advertisement (LSA)
types |
|
|
(g) Adjacency on a point-to-point
and on a multi-access network |
|
|
(h) OSPF graceful restart |
|
2.50 |
Implement IPv4 Enhanced Interior Gateway
Routing Protocol (EIGRP) |
|
|
(a) Best path |
|
|
(b) Loop-free paths |
|
|
(c) EIGRP operations when
alternate loop-free paths are available, and when they are not available |
|
|
(d) EIGRP queries |
|
|
(e) Manual summarization and autosummarization |
|
|
(f) EIGRP stubs |
|
2.60 |
Implement IPv4 Border Gateway
Protocol (BGP) |
|
|
(a) Next hop |
|
|
(b) Peering |
|
|
(c) Internal Border Gateway
Protocol (IBGP) and External Border Gateway Protocol (EBGP) |
|
2.70 |
Implement policy
routing |
|
2.80 |
Implement Performance Routing (PfR) and Cisco Optimized Edge Routing (OER) |
|
2.90 |
Implement filtering, route
redistribution, summarization, synchronization, attributes, and other
advanced features |
|
3.00 |
Implement IPv6 |
|
3.10 |
Implement IP version 6 (IPv6)
addressing and different addressing types |
|
3.20 |
Implement IPv6 neighbor
discovery |
|
3.30 |
Implement basic IPv6 functionality
protocols |
|
3.40 |
Implement tunneling techniques |
|
3.50 |
Implement OSPF version 3 (OSPFv3) |
|
3.60 |
Implement EIGRP version 6
(EIGRPv6) |
|
3.70 |
Implement filtering and route
redistribution |
|
4.00 |
Implement MPLS Layer 3 VPNs |
|
4.10 |
Implement Multiprotocol Label
Switching (MPLS) |
|
4.20 |
Implement Layer 3 virtual private networks
(VPNs) on provider edge (PE), provider (P), and customer edge (CE) routers |
|
4.30 |
Implement virtual routing and
forwarding (VRF) and Multi-VRF Customer Edge (VRF-Lite) |
|
5.00 |
Implement IP Multicast |
|
5.10 |
Implement Protocol Independent
Multicast (PIM) sparse mode |
|
5.20 |
Implement Multicast
Source Discovery Protocol (MSDP) |
|
5.30 |
Implement interdomain
multicast routing |
|
5.40 |
Implement PIM
Auto-Rendezvous Point (Auto-RP), unicast rendezvous
point (RP), and bootstrap router (BSR) |
|
5.50 |
Implement multicast
tools, features, and source-specific multicast |
|
5.60 |
Implement IPv6 multicast, PIM, and
related multicast protocols, such as Multicast Listener Discovery
(MLD) |
|
6.00 |
Implement Network Security |
|
6.01 |
Implement access lists |
|
6.02 |
Implement Zone Based
Firewall |
|
6.03 |
Implement Unicast
Reverse Path Forwarding (uRPF) |
|
6.04 |
Implement IP Source
Guard |
|
6.05 |
Implement authentication,
authorization, and accounting (AAA) (configuring the AAA server
is not required, only the client-side (IOS) is configured) |
|
6.06 |
Implement Control
Plane Policing (CoPP) |
|
6.07 |
Implement Cisco IOS
Firewall |
|
6.08 |
Implement Cisco IOS
Intrusion Prevention System (IPS) |
|
6.09 |
Implement Secure Shell
(SSH) |
|
6.10 |
Implement 802.1x |
|
6.11 |
Implement NAT |
|
6.12 |
Implement routing
protocol authentication |
|
6.13 |
Implement device
access control |
|
6.14 |
Implement security
features |
|
7.00 |
Implement Network
Services |
|
7.10 |
Implement Hot Standby
Router Protocol (HSRP) |
|
7.20 |
Implement Gateway Load
Balancing Protocol (GLBP) |
|
7.30 |
Implement Virtual
Router Redundancy Protocol (VRRP) |
|
7.40 |
Implement Network Time
Protocol (NTP) |
|
7.50 |
Implement DHCP |
|
7.60 |
Implement Web Cache
Communication Protocol (WCCP) |
|
8.00 |
Implement Quality of
Service (QoS) |
|
8.10 |
Implement Modular QoS CLI (MQC) |
|
|
(a) Network-Based Application
Recognition (NBAR) |
|
|
(b) Class-based
weighted fair queuing (CBWFQ), modified deficit round robin (MDRR), and
low latency queuing (LLQ) |
|
|
(c) Classification |
|
|
(d) Policing |
|
|
(e) Shaping |
|
|
(f) Marking |
|
|
(g) Weighted random
early detection (WRED) and random early detection (RED) |
|
|
(h) Compression |
|
8.20 |
Implement Layer 2 QoS: weighted round robin (WRR), shaped round robin
(SRR), and policies |
|
8.30 |
Implement link
fragmentation and interleaving (LFI) for Frame Relay |
|
8.40 |
Implement generic
traffic shaping |
|
8.50 |
Implement Resource
Reservation Protocol (RSVP) |
|
8.60 |
Implement Cisco AutoQoS |
|
9.00 |
Troubleshoot a Network |
|
9.10 |
Troubleshoot complex Layer 2
network issues |
|
9.20 |
Troubleshoot complex Layer 3
network issues |
|
9.30 |
Troubleshoot a network in response
to application problems |
|
9.40 |
Troubleshoot network services |
|
9.50 |
Troubleshoot network security |
|
10.00 |
Optimize the Network |
|
10.01 |
Implement syslog
and local logging |
|
10.02 |
Implement IP Service
Level Agreement SLA |
|
10.03 |
Implement NetFlow |
|
10.04 |
Implement SPAN, RSPAN,
and router IP traffic export (RITE) |
|
10.05 |
Implement Simple
Network Management Protocol (SNMP) |
|
10.06 |
Implement Cisco IOS
Embedded Event Manager (EEM) |
|
10.07 |
Implement Remote
Monitoring (RMON) |
|
10.08 |
Implement FTP |
|
10.09 |
Implement TFTP |
|
10.10 |
Implement TFTP server
on router |
|
10.11 |
Implement Switch-module
Configuration Protocol (SCP) |
|
10.12 |
Implement HTTP and
HTTPS |
|
10.13 |
Implement Telnet |